Add Drivers To Esxi 6 Iso

• Download Esxi 6 Iso

As you know, previously, AutoDeploy and Image Builder played with PowerCLI only. Things have changed in vSphere 6.5 and now you have a possibility to build a custom image within the vSphere Web Client as the new GUI allows you to do that. So, today In the lab – How to create a custom ESXi 6.5 ISO with VMware Image Builder GUI. There will be quite a few screenshots, but I like doing those. The fact that VMware now has a GUI tool which is not very difficult to master is really cool.

So in my lab, I was able to add custom drivers and remove drivers from the original VMware ESXi 6.5 ISO. The resulted image was then exported as ISO or it can be used for AutoDeploy scenarios. You might also need to create a custom ESXi 6.5 ISO when you need to integrate other than the stocked VMware drivers, say you have a NIC card which has it’s own drivers.

Sep 23, 2017 - Create ISO with ESXi 6.0U2 and Realtek 8168 Drivers. Starting here); Add ESXi 6.0u2 and RealTek8186 products to the local Software Depot. To install the Adaptec RAID controller driver with VMware ESXi 6.0 or VMware ESXi. ESXi-Customizer automates the process of customizing the ESXi install-ISO and runs. When the pop-up message prompts to add the driver VIB, click Yes.

The lab has been now fully upgraded to vSphere 6.5 and I’m running vCenter based on Linux (vCenter server Appliance) VCSA 6.5. I had to build a custom ISO which had new drivers for the LSI 3008 storage controller (for vSAN HCL) and the X710-DA2 10GbE NICs. Then only I could upgrade my hosts.

You might be interested, I’ve documented different ways of upgrades:

*********************************************************************

Shop for vSphere licenses at VMware Store:

• vSphere Essentials Plus – vMotion, HA… 3 Hosts, vCenter
• vSphere Essentials – 3 Hosts, vCenter
• vSphere Standard – Per Physical CPU license

*********************************************************************

And also the upgrade of the vCenter:

Also:

So today I’ll show you the steps which are necessary to configure and use the new ImageBuilder GUI and create a custom ISO via this tool. Now, this is not the only way to do it. You might know other methods, tools. I know also the free tool from Andreas Peetz (v-front.de) called ESXi customizer (unsupported no longer, but which has become a PowerShell script).

Few requirements:

Part 1 – Enable the service

• Configure the vSphere ESXi Image Builder Service Startup Type – you’ll do it by going to Administration > Then at System Configuration click Services > Select ImageBuilder Service, click the Actions menu, and select Edit Startup Type.
  • If you’re on Windows then the vSphere ESXi Image Builder service is disabled. ( In the Edit Startup Type window, select Manual or Automatic to enable Auto Deploy.)
  • On the vCenter Server Appliance (my case) , the vSphere ESXi Image Builder service by default is set to Manual. If you want the service to start automatically upon OS startup, select Automatic > Click the Start the service icon.

For the Auto Deploy GUI to be visible in vSphere Web Client, both the Image Builder and Auto Deploy services must be running. You should have the ImageBuilder Service up and ruuning…

Download Esxi 6 Iso

If you want to use vSphere ESXi Image Builder with thevSphere Web Client, log out of the vSphere Web Client and log in again. The Auto Deploy icon is then visible on the home page of the vSphere Web Client. (by default it isn’t).

Part 2 – start using ImageBuilder

Click the Autodeploy icon and you’ll see the initial welcome page. You’ll want to close this one I’m sure…

There are different TABS:

• Software Depots
• Deploy Rules
• Deployed Hosts
• Discovered Hosts

For now, we’ll be just playing with the Images and depots. Not with the deploy rules, deployed hosts or discovered hosts.

Add a software depot first. Choose Custom depot (we will be importing the VMware-ESXi-6.5.0-4564106-depot.zip file into it).

Then Import the VMware-ESXi-6.5.0-4564106-depot.zip file downloaded from VMware.

Next thing. The drivers. I had to import my two drivers. First one is the new driver for my x710-DA2 10GbE Intel NICs….

And also the LSI 3008 driver. This one is for the built-in storage controller. This storage controller is listed on the VSAN Hardware compatibility list (HCL).

Chrono trigger story. The next step is to start the wizard and create an Image Profile.

Put some meaningful name and description….

Select the software packages. In my case, I had to pick the i40e and the one for the LSI 3008. You doing it by drop down the menu and select the check box. Rinse and repeat for all your drivers.

Next, select the VMware ESXi 6.5 zip you have uploaded and deselect the drivers you want to exclude. In my case I don’t want the old drivers. I don’t want to to have both drivers on my ISO….

Then hit the Finish button.

And we have our new profile….

Note the other buttons (Edit, Delete, Clone, Compare to, Move to or Export…). The Export will interest us today.

You can generate ISO or Zip ….

Hit that Generate image button to generate new image…

Once done, you can download…

via your web browser….

Check the follow-up post – VMware vSphere 6.5 and New Image Builder GUI – Cloning a profile.

That’s all folks for today. We have configured VMware Autodeploy service and then we tested the new VMware vSphere image builder GUI. Yes, VMware has done a great job in this relase. We no longer have to be dependent on third party utilities for managing ESXi images.

Dedicated vSphere 6.5 Page here.

ESXi:

• ESXi Commands List – networking commands [Part 2] – useful to check BEFORE upgrade of ESXi !!! (HCL, Drivers, Firmware…)

vCenter Server:

• How to deploy VMware VCSA 6.5 (VMware vCenter Server Appliance) – New!!
• How to Migrate Windows Based vCenter to VCSA 6.5 [Lab] – Windows to Linux
• How to Install VCSA 6.5 in VMware Workstation [LAB] – “testing”

Stay tuned through RSS, and social media channels (Twitter, FB, YouTube)

Background / Problem

• I have two new servers (Dell R720 & Dell R520) that I plan to install ESXi onto.
• During the VMWare Hypervisor installation, I'm told that no network adapters exist.
• Upon checking, I realized that the Broadcom NetXtreme I drivers are required additionally
• I have obtained the Broadcom driver software bundle from VMWare's web site
• I have installed PowerCLI on my desktop in case I will need it.

Question

Most ESXi guides describe doing this on a server that's already been set up once, but I am installing ESXi on these boxes for the first time. Assassin's creed rogue crack torrent.

• How do I properly get these network card drivers into the installation process?

• I am under the impression that I may need to configure a custom installation package that includes these drivers (and use PowerCLI to do this) -- if so, how do I best go about doing this?

4 Answers

Which version of ESXi are you trying to install. I think the drivers for those are now included in 5.1 (I might be wrong though).

Alternatively, you can try to use the Dell customized build of ESXi ISO to install VMWare and see if those include the required drivers you need. Game ukts bus indonesia untuk android.

Another way that can work:

1. Download the offline software bundle for the NetXtreme I cards from VMWare.
2. Download the ESXi Customizer software
3. Extract ESXi customizer
4. Run ESXi customizer as an administrator.
5. Select the ISO file
6. Select the .VIB file for the drivers
7. Select an output directory
8. During the installation, allow ESXi customizer to replace the VIB file
9. ESXi Customizer creates a bootable ISO.
10. Use the custom ESXi ISO to install.

A huge thanks for these tools as they are the only thing that allowed me to get this done quickly.

I'm going to wait to see how the Dell ISO works out and then try this one. I'll mark the answer as correct in that order of which one works.

References

• ESXi Customizer Software[VMWare Front Experience]
• VMWare ESXi 5 whitebox NIC support[ivobeerens.nl]

Make this easy on yourself - get the Dell-provided ESXi images. Those should have all the hardware things you might need.

If you use ESXi 6.0 or ESXi 6.5 or newer, you must use ESXi-Customizer-PS. The Windows desktop app: ESXi-Customizer is deprecated.

ESXi-Customizer-PS is a free tool from the same author that runs under PowerCLI and you can also inject a driver into ISO ESXi install.

Reference: http://www.sysadmit.com/2017/01/vmware-esxi-instalar-driver.html

Not the answer you're looking for? Browse other questions tagged virtualizationvmware-esxiinstallationhypervisorpowercli or ask your own question.